Your over-the-range microwave is humming but the food stays cold, or it threw sparks and a puff of smoke. Call Acdc Appliance Repair and we connect you with a licensed, insured independent pro near Charlottesville who services OTR, built-in and drawer microwaves.
A microwave is not a toaster. Inside the cabinet sits a high-voltage capacitor that can hold a lethal charge long after the plug is pulled, which is why this repair belongs with a trained technician and never with a screwdriver and a video.
We run a free referral line for homeowners. A dispatcher hears what the microwave is doing and connects you with an independent local technician who knows both the high-voltage side and the installation side of these units.
The contractors in our network are independent businesses that carry the license and insurance local rules require. Ask to see both at the door.
A magnetron or control board for a built-in can be a real expense. The technician writes the quote before any work starts, so you can compare it to a replacement unit and decide.
We look for a pro already working near Charlottesville. A same-day slot opens up regularly when local pros have breathing room, and the arrival window gets set while you are on the line.
The right pro arrives with an insulated capacitor discharge tool, a meter for testing the diode and transformer windings, the tech sheet for your model, and a survey meter to confirm no leakage once the repair is done.
This is the work we route for OTR, wall-mounted, drawer and convection combo microwaves. Every job starts by safely bleeding the capacitor before a single meter lead goes in.
Everything seems to run except the heating. That points to the high-voltage circuit: a failed magnetron, a shorted diode, an open capacitor, or a burnt transformer winding. The pro checks each part with a meter after bleeding the stored charge.
Sparking inside the oven often traces to a food-soaked waveguide cover, bare metal where the cavity paint chipped, or a worn rack support in a combo unit. Ignoring it can scorch the cavity and kill the magnetron.
Microwaves use a chain of door interlock switches plus a monitor switch. When a switch sticks, the monitor switch shorts the line on purpose and blows the line fuse, so the whole unit goes dark. A unit that runs with the door open needs to be unplugged right away.
When keys stop responding or the oven refuses to shut off at zero, the touchpad membrane or a welded relay on the control board is usually behind it. The pro tests the keypad matrix and the relays first so the right part gets ordered.
Because an OTR unit doubles as the hood over your cooktop, the vent side wears out too. The technician can replace a noisy fan motor, a burnt cooktop lamp, clogged grease filters, and the charcoal filter used on recirculating setups.
A plate that will not spin usually needs a turntable motor or a new coupler. OTR units that sag or rattle may have a loose wall bracket or top bolts pulled through the cabinet, which is a safety issue with a hot stove below.
Here is a fast way to match the symptom to the likely cause. Pass it along when you call, so the pro can load the right parts for your model.
| Symptom | Common cause | What the tech checks |
|---|---|---|
| Runs, light on, no heat | Magnetron, diode, capacitor or transformer failure | Each high-voltage part with the capacitor discharged |
| Completely dead, no display | Blown line fuse from a failed door switch | Fuse, interlock switches, monitor switch |
| Sparks or smoke inside | Burnt waveguide cover, chipped cavity paint | Cover, cavity surface, stirrer, rack supports |
| Keeps running at zero or with door open | Welded relay or failed interlock | Control board relays and door switch chain |
| Plate will not turn | Turntable motor or coupler | Motor continuity, coupler, roller ring |
| Vent fan loud or dead | Fan motor bearings, greasy filters | Fan motor, damper, grease and charcoal filters |
A basic countertop microwave usually is not worth a service call, and most technicians will tell you so on the phone. Over-the-range units, built-in wall models, drawer microwaves and convection combos are a different story. They cost more, they fit a cutout or bracket, and swapping one means trim kits, cabinet work and a vent connection.
Leave the cabinet closed and pick up the phone. The dispatch line is answered around the clock.
Tell the dispatcher what type of microwave you have, whether it sits over the range, in a wall, or in a drawer, and what it is doing. If you can, read off the model number from the tag inside the door frame.
An independent technician working close to Charlottesville gets the job, and the dispatcher shares the arrival window. Same-day arrivals are routine when a local independent pro is free.
First comes a safe discharge of the capacitor, then meter tests on the magnetron, diode, transformer, door switches and board. An OTR unit sometimes has to be lifted off its mounting plate. The written, upfront quote comes before any work begins, and you decide.
Once the part is in, the technician runs a water heating test and, if the high-voltage side was opened, checks the door edges with a leakage survey meter. The technician typically documents the parts and labor warranty on the work order; ask for a copy.
The OTR unit died with no display at all. The pro found the line fuse blown and a failed interlock switch behind it. He replaced the switch and the fuse together and explained that a fuse alone would have popped again within a week.
The built-in in our wall oven stack hummed but did not heat. A new one would have meant a new trim kit too. The tech tested the diode and magnetron, replaced the magnetron, and checked for leakage with a meter before he left.
Sparks were jumping off the side wall every time I warmed soup. It was a burnt waveguide cover soaked with grease. Quick fix, and he showed me how to keep that cover clean.
Our microwave drawer would not stop running after the timer hit zero. The pro found a welded relay on the control board, ordered the board by model number, and came back two days later to install it.
When the light, fan and turntable all work but food stays cold, the high-voltage circuit has failed. The most common causes are a bad magnetron, a shorted diode, an open capacitor, or a burnt transformer. These parts carry lethal voltage, so let a trained technician test them.
Not until someone looks at it. Arcing tends to start at a greasy waveguide cover or a bare spot in the cavity paint, and it can take out the magnetron if it keeps happening. If it smokes, leave the door shut and unplug it if the cord is within safe reach.
A totally dark microwave often has a blown line fuse. The fuse usually blows because a door interlock switch failed and the monitor switch shorted the circuit on purpose. Replacing only the fuse is not enough; the technician tests the whole switch chain.
Often, yes. OTR, built-in and drawer models cost more and are sized to your cabinets, so replacing them can mean new brackets, trim and vent work. Countertop units are usually cheaper to replace. The technician gives you a written quote so you can compare.
Please do not. The high-voltage capacitor can hold a lethal charge long after the unit is unplugged, and a slip with a screwdriver can be fatal. Leave the cabinet closed and let a trained pro use an insulated discharge tool.
Ask for it, especially after high-voltage or door work. Many pros sweep the door seal and vents with a microwave survey meter before they leave, to confirm the unit is sealed properly.
We route microwave calls from houses, condos and apartments throughout Charlottesville and nearby neighborhoods. Dispatchers send each job to an independent pro already working close to your address, which helps when an OTR unit needs a second set of hands to lift off the wall plate.
The dispatch line is open 24 hours a day. A late-night call is usually booked for the next morning, and daytime calls often turn into same-day visits when a local pro has an opening.
